ALVApipe 1/2-inch HDPE pipes in 100-meter rolls are priced at approximately Rp494,950–Rp535,000 per roll for PN10 SDR17 and Rp638,186–Rp671,775 per roll for PN16 SDR11, based on the available reference pricing data. Prices may change depending on promotions and sellers, so it is advisable to check the latest prices before making a purchase.
How Much Does a 100-Meter Roll of 1/2-Inch HDPE Pipe Cost?
The price of 1/2-inch HDPE pipe, or OD 20 mm, varies depending on its pressure rating and purchasing format. For requirements involving a 100-meter roll, the following ALVApipe reference prices can serve as an initial budgeting guide.
- PN10 SDR17 HDPE pipe, 100-meter roll: Rp494,950–Rp535,000. View the PN10 product on Shopee.
- PN16 SDR11 HDPE pipe, 100-meter roll: Rp638,186–Rp671,775. View the PN16 product on Shopee.
- PN16 SDR11 HDPE pipe, sold by the meter: Rp4,794–Rp6,700 per meter. View the per-meter product on Shopee.
These prices are provided for reference and are not guaranteed to remain unchanged. Before placing an order, check the prices, stock availability, purchasing terms, and shipping costs displayed on the product page.
ALVApipe 1/2-Inch HDPE Pipe Specifications
The 1/2-inch HDPE pipes discussed in this article have an outside diameter (OD) of 20 mm. They are made from high-density polyethylene (HDPE), a material widely used in piping applications.
Based on the product data used as a reference, the specifications include:
- Size: 1/2 inch or OD 20 mm.
- Material: 100% virgin-grade PE-100.
- PN10 SDR17: Nominal pressure rating of 10 bar.
- PN16 SDR11: Nominal pressure rating of 16 bar.
- Product standard: SNI 4829.2:2015.
- Domestic Component Level (TKDN): 69.42%, according to the product data.
PN indicates the nominal pressure rating, while SDR represents the ratio of the pipe’s outside diameter to its wall thickness. For the same pipe diameter and material standard, a lower SDR value indicates a relatively thicker wall.
Price alone is not enough to determine the right pipe. Operating pressure, temperature, joining methods, installation conditions, and system technical requirements must also be considered to ensure that the pipe specifications match the installation requirements.
For more product information, visit the ALVApipe HDPE Water Pipes page.
Retail Prices and Full-Roll Prices for 1/2-Inch HDPE Pipes
1/2-inch HDPE pipes are available in 100-meter rolls or by the meter, depending on the product options and seller’s terms.
Buying a full roll can be a practical option for installations that require relatively long pipe runs. In addition to simplifying material planning, the roll length helps procurement teams calculate the required quantity based on the total length of the installation route.
Purchasing by the meter, meanwhile, may be suitable for repairs, pipe section replacements, or small-scale projects. This option allows buyers to match the material quantity to their actual requirements without having to purchase an entire roll.
Before deciding, ensure that the pressure rating of the per-meter product matches the installation specifications. Also, compare prices based on the actual length purchased rather than relying solely on the listed product price.
What Affects the Price of 1/2-Inch HDPE Pipes?
1. Pressure Rating and SDR
PN10 SDR17 and PN16 SDR11 pipes have different specifications. For the same diameter, PN16 SDR11 has a relatively thicker wall than PN10 SDR17. Differences in material requirements and specifications are among the factors that influence pricing.
Choose a pressure rating based on the installation design requirements. A pipe with a higher pressure rating is not automatically the most suitable choice for every application.
2. Purchase Length and Quantity
Prices per meter and per roll may differ because of sales formats and promotions. If your requirements involve several rolls, calculate the total pipe length first, then confirm availability and pricing with the seller.
3. Delivery Location
The project location affects shipping costs and the total purchase budget. Therefore, check delivery charges before completing the transaction, especially when ordering large quantities or shipping to areas outside the main distribution region.
4. Price at the Time of Purchase
Marketplace prices may change due to promotions, discounts, and updated offers. For more accurate pricing, revisit the PN10, PN16, or per-meter product pages before placing an order.
What Are 100-Meter Rolls of 1/2-Inch HDPE Pipes Suitable For?
HDPE pipes with an OD of 20 mm may be considered for water installations where their capacity and pressure ratings are appropriate for the system design. Suitability depends on the required flow rate, pipe run length, operating conditions, and specified technical requirements.
HDPE has flexible material characteristics that can help accommodate certain installation routes. However, bending radius, joining methods, and site conditions must still comply with the applicable technical guidelines.
If the pipes will be used for drinking water or other specialized applications, ensure that the product documentation and specifications support the intended use. Suitability should not be determined solely by color or marketing terminology.
How to Calculate Your 1/2-Inch HDPE Pipe Requirements
Before purchasing 100-meter rolls of 1/2-inch HDPE pipe, calculate the total length of the installation route. A simple calculation involves dividing the required pipe length by the length of one roll.
For example, if the total required pipe length is 300 meters and each roll contains 100 meters, the calculation is:
300 meters ÷ 100 meters per roll = 3 rolls.
This result represents the basic pipe length requirement. For actual project planning, also account for joints, branch connections, cutting, route changes, and a reasonable allowance for spare material.
For installations with multiple branches, prepare a list of the required lengths for each section. This helps improve purchasing accuracy and reduce the risk of material shortages.
How to Buy 100-Meter Rolls of 1/2-Inch HDPE Pipes
Before placing an order, check the following:
- Pipe size: Ensure that the dimensions match your requirements: OD 20 mm or 1/2 inch, according to the product specifications.
- Pressure rating: Choose PN10 SDR17 or PN16 SDR11 based on the technical requirements.
- Required length: Calculate the total length in meters and the number of rolls needed.
- Delivery location: Verify the destination address and shipping costs.
- Joining requirements: Ensure that the joining method and accessories are compatible with the installation system.
Once the specifications have been determined, check product availability and the latest prices at the ALVApipe Official Store on Shopee. If you are unsure which pressure rating to choose, consult the supplier about your installation requirements before purchasing.
Buy 100-Meter Rolls of 1/2-Inch HDPE Pipes from ALVApipe
ALVApipe is a piping brand owned by PT Alpha Cikupa Makmur, providing pipe solutions for water installations and related applications. When selecting a product, ensure that its dimensions, pressure rating, standards, and technical documentation meet the requirements of your project.
As a pipe manufacturer and supplier, ALVApipe provides product information through its official website. You can also explore purchasing options through the ALVApipe Official Store on Shopee.
To select the right product, prioritize compatibility between the pipe specifications and your installation requirements. This allows you to plan purchases more accurately, whether for simple repairs or larger projects.
Get 1/2-Inch HDPE Pipe Prices That Match Your Requirements
Prices for 100-meter rolls of 1/2-inch HDPE pipes can serve as an initial reference for calculating your installation budget. However, make sure that the pressure rating, pipe length, required quantity, and delivery location match your project plan before placing an order.
For full-roll purchases or retail quantities sold by the meter, check the available products and latest prices through ALVApipe on Shopee.
For project requirements, bulk procurement, or technical specification consultations, contact the ALVApipe team via WhatsApp at +6287726663295, or click the [Contact Us] button below to discuss your requirements and request a competitive quotation tailored to your needs.
