When looking for prices for 100-meter rolls of 3/4-inch HDPE pipe, there are two things to check before purchasing: the price per roll and the required pressure rating. According to the available product data, ALVApipe Water is available in PN10 SDR17 and PN16 SDR11 variants, allowing buyers to compare specifications based on their water distribution requirements rather than price alone.
Prices for 100-meter rolls of 3/4-inch HDPE pipe vary depending on the selected pressure rating. PN10 SDR17 may be suitable for installations with a nominal pressure rating of 10 bar, while PN16 SDR11 is intended for applications requiring a nominal pressure rating of 16 bar. Before purchasing, match the pipe selection to your installation requirements and check the latest prices through the official ALVApipe store.
Why Choose 3/4-Inch HDPE Pipe in 100-Meter Rolls?
The 3/4-inch HDPE pipe discussed in this article has an outside diameter (OD) of 25 mm. This size may be suitable for water distribution lines that require this diameter according to the installation’s technical calculations.
For homeowners, garden managers, and farmers, purchasing a 100-meter roll can simplify planning for relatively long water supply routes. Installation contractors and procurement teams can also use the roll length to estimate material requirements and prepare an initial budget.
However, roll length is not the only consideration. Operating pressure, water flow rate, site conditions, and joining methods must also be evaluated to ensure that the selected pipe matches the system design.
Prices for 100-Meter Rolls of PN10 and PN16 3/4-Inch HDPE Pipe
Prices for 100-meter rolls of 3/4-inch HDPE pipe vary depending on the pressure rating, sales channel, promotions, and product availability. The following reference prices were identified during the research.
PN10 SDR17 3/4-Inch HDPE Pipe Price
Marketplace listings for ALVApipe Water PN10 SDR17 with an OD of 25 mm show prices ranging from approximately Rp574,418 to Rp650,440 per 100-meter roll. PN10 has a nominal pressure rating of 10 bar. This variant may be considered for household clean water distribution, plantations, and irrigation, provided that it meets the system’s design pressure and operating conditions.
To check the latest prices and availability, visit ALVApipe Water 3/4 Inch PN 10 SDR 17 Roll 100 Meter.
PN16 SDR11 3/4-Inch HDPE Pipe Price
Marketplace listings for PN16 SDR11 with an OD of 25 mm show prices ranging from approximately Rp772,219 to Rp925,796 per 100-meter roll. PN16 has a nominal pressure rating of 16 bar. This variant may be suitable for systems requiring a higher pressure rating, including installations with booster pumps, provided that the pipe specifications comply with the network design.
Check the latest offers through ALVApipe Water 3/4 Inch PN 16 SDR 11 Roll 100 Meter.
Per-Meter Purchasing Options
If you only need a few meters for water line repairs, extending an existing pipeline, or replacing part of an installation, ALVApipe 3/4-inch HDPE pipes are also available for purchase by the meter. You can choose PN10 SDR17, with a nominal pressure rating of 10 bar, or PN16 SDR11, with a nominal pressure rating of 16 bar, according to your installation requirements.
Check the latest prices and place an order through ALVApipe Water PN10 SDR17 Per Meter or ALVApipe Water PN16 SDR11 Per Meter on the ALVApipe Shopee store. Select the appropriate product to view its current price and availability, then adjust the purchase quantity to match the length of your required pipeline.
What Is the Difference Between PN10 and PN16 HDPE Pipes?
The main difference between PN10 and PN16 lies in their nominal pressure ratings. PN10 indicates a nominal pressure rating of 10 bar, while PN16 indicates a nominal pressure rating of 16 bar.
For the same pipe diameter and material standard, a lower SDR value indicates a relatively thicker pipe wall. The PN16 SDR11 variant has a relatively thicker wall than an SDR17 configuration of the same diameter. This difference is one of the factors that influence product applications and pricing.
So, which option should you choose? The answer depends on the system’s design pressure, flow requirements, installation conditions, and project-specific technical requirements. Do not choose PN16 simply because its pressure rating is higher, or select PN10 solely because it costs less.
Advantages of ALVApipe HDPE Pipes
ALVApipe Water pipes are made from virgin-grade PE-100 HDPE material. This material is flexible and resistant to corrosion and abrasion. Its flexibility can help accommodate certain installation routes, but bending radius and installation methods must still comply with the applicable technical guidelines.
The smooth inner surface also helps reduce pressure losses caused by flow friction. However, overall network performance still depends on pipe diameter, pipeline length, joints, flow rate, and the installation design as a whole.
ALVApipe Water complies with SNI 4829.2:2015 and has a Domestic Component Level (TKDN) of 69.42%. PT Alpha Cikupa Makmur implements an ISO 9001:2015 quality management system at the company level. This ISO certification does not constitute individual product certification for the pipes.
Further product information and specifications are available on the ALVApipe HDPE Water Pipes page.
How to Calculate Your Requirements for 100-Meter HDPE Pipe Rolls
You can estimate your initial pipe requirements by dividing the total pipeline length by the length of one roll.
For example, if the required pipeline length is 300 meters and each roll contains 100 meters, the calculation is:
300 meters ÷ 100 meters per roll = 3 rolls.
This figure does not yet account for branches, fittings, joints, changes in direction, or cutting requirements. For installation projects, use actual route measurements or construction drawings to calculate the purchase quantity more accurately.
How to Buy 3/4-Inch HDPE Pipes from ALVApipe
Before placing an order, confirm the OD of 25 mm, the required PN10 or PN16 pressure rating, the appropriate SDR, the total pipe length, the number of rolls, and the delivery location. If purchasing by the meter, also check the availability of the required variant.
You can explore the available products through the ALVApipe Shopee store or learn more about the company on the ALVApipe website.
For orders involving several rolls or project procurement, prepare the required specifications and quantities before requesting a quotation. This will help the sales team assess your requirements and identify suitable product options.
Get 3/4-Inch HDPE Pipe Prices That Match Your Requirements
Prices for 100-meter rolls of 3/4-inch HDPE pipe can serve as an initial reference for preparing your budget. However, the right choice should also take into account the pressure rating, product availability, purchase quantity, and delivery location.
For retail purchases or full-roll orders, check the latest prices and availability through the ALVApipe Shopee store.
If you are still deciding between PN10 and PN16 for a home, garden, or project installation, contact the ALVApipe team to confirm specifications, stock availability, and pricing options tailored to your requirements. Reach us via WhatsApp at +6287726663295 or click the [Contact Us] button below for assistance in selecting the right product for your needs.
