HDPE pipes are flexible, corrosion-resistant, and suitable for various clean water distribution networks. In 2026, HDPE pipe prices per length need to be understood based on size, pressure class, and sales format, as ALVApipe Water on Shopee is available by the meter and in 100-meter rolls.
Understanding the Main Characteristics of HDPE Pipes for Clean Water Networks
HDPE pipe or High Density Polyethylene, is a piping material widely used for water networks due to its flexibility and corrosion resistance. These characteristics make HDPE suitable for clean water distribution lines, including outdoor and underground installations.
ALVApipe Water uses PE-100 material for clean water distribution needs. The product is available in diameters from OD 20 mm to 250 mm, with a choice of pressure classes that can be adjusted according to system requirements.
PE-100 material also has mechanical strength and flexibility that support its use under certain field conditions. However, the selection of diameter and pressure class must still follow calculations for flow rate, working pressure, installation conditions, and project technical specifications.
Advantages of Corrosion-Resistant and Highly Flexible PE-100 Material
One of the most recognizable characteristics of PE 100 HDPE pipes is their flexibility. Compared with rigid materials, HDPE can follow certain changes in the pipeline route, which can help with installation in field conditions that require adjustments.
HDPE also does not experience corrosion like metal pipes. Its smooth inner surface helps maintain water flow and reduces the potential for material buildup on the pipe wall.
ALVApipe Water states an estimated service life of up to 50 years under suitable usage conditions. This figure still depends on pressure, temperature, environmental conditions, system design, and installation quality.
Classification of HDPE Pipe Types Based on Nominal Pressure (PN)
PN 10 and PN 16 HDPE pipes are differentiated based on the nominal pressure they can handle within a system. For ALVApipe Water, PN 10 corresponds to SDR 17, while PN 16 corresponds to SDR 11.
The smaller the SDR value, the thicker the pipe wall compared to its outside diameter. Therefore, PN 16 pipes generally have thicker walls than PN 10 pipes with the same diameter.
Differences Between PN 10 and PN 16 HDPE Pipes for Various Project Scales
PN 10 can be used in systems with a nominal pressure of up to 10 bar, while PN 16 has a nominal pressure of up to 16 bar. The selection should not be based on price alone, as the actual working pressure of the network must be the primary consideration.
For example, ALVApipe provides 20 mm pipes in both PN 10 and PN 16 options. The 20 mm PN 10 product is offered for clean water needs with a different pressure class from the 20 mm PN 16 variant.
For networks that require higher pressure, the PN 16 class can be an option to consider based on system calculations. Technical consultation is still required to ensure that the material selection is suitable for the installation requirements.
Estimated HDPE Pipe Price List per Length and per Roll 2026
HDPE pipe prices per length in 2026 need to be viewed based on how the products are sold. On the ALVApipe Official Store on Shopee, the ALVApipe Water products I checked are available by the meter and in several 100-meter roll options.
Because the listings are not displayed as 6-meter lengths, the price for six meters should not be stated as the official selling price. If a specific length estimate is needed, the calculation can be based on the price per meter, while roll purchases follow the price listed on the product listing.
ALVApipe Water 20 mm PN 10 Price
ALVApipe Water 20 mm PN 10 is an HDPE pipe option for clean water networks with a PN 10 pressure class. The product is available for individual purchase by the meter, priced at Rp4,950 per meter at the time of checking.
The same product is also available in a 100-meter roll priced at Rp494,950. These different purchasing formats provide options for users who need materials in limited quantities as well as for longer network requirements.
View the 20 mm PN 10 product by the meter on the ALVApipe Official Store on Shopee.
View the 20 mm PN 10 100-meter roll on the ALVApipe Official Store on Shopee.
ALVApipe Water 20 mm PN 16 Price
For requirements with a higher pressure class, ALVApipe Water 20 mm PN 16 is available by the meter. The price displayed on Shopee at the time of checking was Rp5,400 per meter.
This variant has the same diameter as PN 10, but a different pressure class. This difference needs to be considered when determining material specifications for a water network.
View the 20 mm PN 16 product by the meter on the ALVApipe Official Store on Shopee.
View the 20 mm PN 16 100-meter roll on the ALVApipe Official Store on Shopee.
ALVApipe Water 25 mm PN 10 Price
ALVApipe Water 25 mm PN 10 has a nominal diameter of 3/4 inch and is offered by the meter. The price displayed on Shopee at the time of checking was Rp6,717 per meter.
This size can be considered for network requirements that need a larger diameter than 20 mm. The final selection still needs to be adjusted to the required flow rate and network design.
View the 25 mm PN 10 product by the meter on the ALVApipe Official Store on Shopee.
View the 25 mm PN 10 100-meter roll on the ALVApipe Official Store on Shopee.
ALVApipe Water 32 mm PN 10 Price
ALVApipe Water 32 mm PN 10 or 1 inch, is available by the meter at Rp9,690 per meter on the listing that was checked.
For larger quantity requirements, a 100-meter roll option is also available at Rp969,000. The roll format can be considered when the material requirement has been determined based on the length of the network route.
View the 32 mm PN 10 product by the meter on the ALVApipe Official Store on Shopee.
View the 32 mm PN 10 100-meter roll on the ALVApipe Official Store on Shopee.
ALVApipe Water 32 mm PN 16 Price
ALVApipe Water 32 mm PN 16 has a 1 inch diameter with a PN 16 pressure class. On the Shopee listing that was checked, the price for the product by the meter was Rp16,317 per meter.
This variant is relevant when the system requires a higher pressure class than 32 mm PN 10. The price difference reflects the difference in specifications, so buyers should not compare the two solely based on the price per meter.
View the 32 mm PN 16 product by the meter on the ALVApipe Official Store on Shopee.
View the 32 mm PN 16 100-meter roll on the ALVApipe Official Store on Shopee.
ALVApipe Water 50 mm PN 10 Price
ALVApipe Water 50 mm PN 10 or 1 1/2 inch, is available by the meter at Rp23,114 per meter.
For roll purchases, the Shopee listing shows a 100-meter roll priced at Rp2,311,350. This option can be used as an initial reference when calculating material requirements for longer distribution lines.
View the 50 mm PN 10 product by the meter on the ALVApipe Official Store on Shopee.
View the 50 mm PN 10 100-meter roll on the ALVApipe Official Store on Shopee.
ALVApipe Water 63 mm PN 10 Price
For a 2 inch diameter, ALVApipe Water 63 mm PN 10 is available by the meter at Rp35,483 per meter on the listing I checked.
Shopee also displays a 100-meter roll option for the same product. The roll listing price may change depending on promotions and marketplace conditions, so buyers should check the latest price before placing an order.
View the 63 mm PN 10 product by the meter on the ALVApipe Official Store on Shopee.
View the 63 mm PN 10 100-meter roll on the ALVApipe Official Store on Shopee.
Easy HDPE Pipe Procurement from an Official Manufacturer
Choosing an HDPE pipe manufacturer is not only about the price per meter. Material suitability, pressure class, product standards, production consistency, size availability, and technical support should all be considered together.
ALVApipe is a brand of PT Alpha Cikupa Makmur that manufactures HDPE piping solutions in Tangerang. ALVApipe Water is intended for clean water network applications and has SNI 4829.2:2015 certification. The company also implements an ISO 9001:2015 quality management system.
For water network contractors, project procurement teams, building material store owners, and buyers with smaller requirements, separating product specifications from actual prices helps make the procurement process clearer. Marketplace prices can be used as a purchasing reference, while project requirements with specific specifications should be consulted directly with the manufacturer.
Large-Scale Project Services and Retail Purchases via the ALVApipe Official Store on Shopee
For project requirements, bulk orders can be discussed based on diameter, PN, SDR, material length, fitting requirements, and delivery location. This approach helps determine the specifications before the materials are ordered.
For retail purchases, several ALVApipe Water variants are available through the ALVApipe Official Store on Shopee. Buyers can check the latest prices and availability directly on each product page.
Please note that Shopee prices are marketplace prices at the time of checking and may change due to promotions, stock availability, or platform policies. Therefore, readers using this article to prepare a Bill of Quantity (BoQ) or project budget should recheck the prices before making a purchase.
Choosing an HDPE pipe is not simply about finding the lowest price. PE-100 material, the appropriate pressure class, product standards, the correct diameter, and installation quality are important parts of a long-term investment.
Contact the ALVApipe team today via WhatsApp at +6287726663295 or the [Contact Us] button below for consultation and the best price quotation based on your project requirements!
