Searching for the price of a 2 inch 100 meter HDPE pipe usually goes beyond simply asking how much one roll costs. Buyers also need to know the actual size, pressure class, price per meter, and whether the pipe is available for retail purchases or large-volume project requirements.
For ALVApipe 2 Inch (63 mm) PN 10 HDPE Water Pipe, the indexed ALVApipe Shopee listing shows a price of around Rp33.028 per meter for retail purchases. Meanwhile, the same product specifications in a 1 roll 100 meter package are listed at around Rp3.294.746 per roll. Prices may change depending on sales conditions and marketplace updates.
How Much Does 2 Inch 100 Meter HDPE Pipe Cost?
The price of a 2 inch 100 meter HDPE pipe needs to be distinguished between the retail price per meter and the price per 100-meter roll.
On the indexed ALVApipe Shopee listing, the 2 inch (63 mm) PN 10 HDPE Water Pipe for retail purchases is listed at around Rp33,028 per meter. Meanwhile, the same product in a 100-meter roll is listed at around Rp3,294,746.
These prices are references from the marketplace listing when the data was updated. Promotions, price updates, and sales conditions may cause the actual price to change.
For direct purchases through the marketplace, you can view the 2 Inch 63 mm PN 10 HDPE Pipe per Meter or 2 Inch 63 mm PN 10 HDPE Pipe per 100 Meter Roll on ALVApipe Shopee.
For purchases of several rolls for project requirements, the price and availability should be confirmed with the ALVApipe team beforehand.
ALVApipe 2 Inch HDPE Pipe Specifications
The HDPE pipe marketed as 2 inch size for this product has an outer diameter or OD of 63 mm.
For the PN 10 configuration, ALVApipe specifies SDR 17. With an OD of 63 mm and SDR 17, the pipe wall thickness is approximately 3,8 mm.
The pipe uses High Density Polyethylene (HDPE) material with characteristics including flexibility, impact resistance, corrosion and abrasion resistance, as well as a smooth inner surface.
These specifications allow the pipe to be used for water distribution needs according to the system’s design and working pressure. Product selection should still be adjusted to the installation conditions and technical requirements of the project.
ALVApipe Water also lists SNI 4829.2:2015 in its product information. The official ALVApipe HDPE Water Pipe page also provides specifications for diameter, SDR, PN, material characteristics, and product certifications.
Retail Price and Price of 1 Roll of 2 Inch HDPE Pipe
Not every buyer needs 100 meters at once.
For network repairs, home installations, land, irrigation, or work requiring a specific length, purchasing by the meter can be an option. The ALVApipe Shopee listing provides 2 Inch 63 mm PN 10 HDPE Water Pipe in a retail per meter option.
Meanwhile, contractors or project procurement teams requiring longer pipelines can consider purchasing the product in a 100 meter roll.
The ALVApipe Shopee listing for the 2 inch OD 63 mm PN 10 product in a 100 meter package is listed at around Rp3.294.746 per roll when the data was updated.
For example, a requirement of 300 meters would require approximately three rolls if the product is available in 100 meter rolls. The actual quantity still needs to be adjusted according to the pipeline design, joints, fittings, and installation conditions.
What Affects the Price of a 2 Inch HDPE Pipe?
The price of HDPE pipe is not determined by diameter alone. The following factors can cause the price per meter or per roll to vary.
Pressure Class and SDR
A 2 inch size is not enough to determine the price. Also check the SDR and PN.
ALVApipe Water lists an OD of 63 mm with SDR 11 PN 16 and SDR 17 PN 10 options. Differences in wall thickness and pressure class can affect material requirements and pricing.
Purchase Quantity
Purchasing one meter has different requirements from purchasing several rolls for a project.
If the requirement reaches hundreds or thousands of meters, it is advisable to inform the ALVApipe team of the required quantity so that the quotation can be adjusted according to the specifications and procurement volume.
Delivery Location
The product price is not the only cost component. The project location, quantity of goods, delivery access, and transportation method can affect the total procurement cost.
Therefore, project buyers should calculate the total cost up to the delivery location, rather than only considering the price displayed on the product page.
Price Conditions at the Time of Purchase
Marketplace prices may change due to promotions, price updates, or sales channel policies. The price data in this article is a reference based on the indexed listing when the article was updated.
To obtain the latest price, check the product listing again before placing an order.
What Is 2 Inch 100 Meter HDPE Pipe Suitable For?
A 2 inch HDPE pipe can be used for various water distribution needs when its diameter and pressure class are suitable for the network design.
An OD of 63 mm can be used for water distribution lines, irrigation, or other applications that require HDPE pipe with these specifications.
However, do not choose a pipe based only on its 2 inch size. Working pressure, SDR, site conditions, installation method, and connection requirements also need to be considered.
For projects with specific technical specifications, consulting before purchasing can help prevent material selection errors.
How to Calculate the Required Amount of 2 Inch HDPE Pipe
The calculation can start with the length of the pipeline.
For example, if the required pipeline length is 300 meters and the pipe is available in 100 meter rolls, the basic material requirement is:
300 meters ÷ 100 meters = 3 rolls
However, this figure may not be the final quantity. The working drawings need to be reviewed to determine the pipeline route, changes in direction, fitting requirements, connections, and possible additional length.
For project procurement, it is better to calculate the material requirements based on the drawings or work volume rather than simply estimating based on the pipeline length.
How to Buy 2 Inch 100 Meter HDPE Pipe
Purchase requirements may vary from one user to another.
For retail needs, buyers can order based on the required length through ALVApipe’s sales channels. The 2 inch OD 63 mm PN 10 product is available per meter on ALVApipe Shopee.
For 1 roll of 100 meters or several rolls, buyers can check the latest product availability and prices through ALVApipe’s sales channels.
For contractors and project procurement, it is advisable to prepare the following information before requesting a quotation:
- Pipe diameter: 2 inches or OD 63 mm.
- Pressure class: PN 10 or another specification according to requirements.
- Required SDR.
- Total pipe length.
- Number of rolls.
- Delivery location.
- Fitting requirements.
- Required documents or certifications.
This information makes the quotation process faster because the sales team can understand the requirements from the beginning.
Buy 2 Inch 100 Meter HDPE Pipe from ALVApipe
Choosing where to purchase is not only about getting a low pipe price. For installation needs, product specifications and the suitability of the material for the system also need to be considered.
ALVApipe Water is manufactured by PT Alpha Cikupa Makmur and provides HDPE pipes for water distribution needs in various diameters and pressure classes.
For the 2 inch size, the product discussed has an OD of 63 mm with an SDR 17 PN 10 configuration. The product can be marketed for per meter purchases as well as larger-volume requirements, depending on availability and ordering mechanisms.
If you want to see a discussion of prices based on other diameters and specifications, you can read the Complete Guide to HDPE Pipe Prices from ALVApipe.
For information about purchasing and ordering HDPE pipes, you can also see Selling SNI-Standard HDPE Pipes: Prices and How to Order.
If you want to purchase directly through the marketplace, visit ALVApipe Shopee to view the latest products, prices, and availability.
Get the 2 Inch HDPE Pipe Price According to Your Needs
The price of a 2 inch 100 meter HDPE pipe can be an initial consideration when preparing a budget. However, the most suitable price still depends on the specifications, purchase quantity, delivery location, and price conditions at the time of transaction.
For retail needs, purchases can be made through ALVApipe Shopee. Meanwhile, for larger project requirements, you can provide the required length, PN/SDR specifications, number of rolls, and project location to the ALVApipe team.
With this information, material requirements can be assessed more accurately before the order is placed.
To view prices and purchase ALVApipe 2 Inch HDPE Pipe online, visit ALVApipe Shopee.
For project requirements, bulk procurement, or specification consultation, please contact the ALVApipe team via WhatsApp +6287726663295 or click the [Contact Us] button below for consultation and a price quotation according to your needs!
